Job at a Glance
- Company
- EDGE Group
- Location
- Abu Dhabi, UAE
- Salary
- Not disclosed
- Job type
- Not stated in the postings
- Posted
- November 16, 2026
EDGE Group is hiring for eight roles in Abu Dhabi — five engineering posts, two project management roles and one procurement role, all posted on its careers page on 14–16 November 2026. The roles sit in different corners of the group: the guidance and control role is with ADASI, EDGE’s autonomous systems company, the procurement and mechanical design roles support POWERTECH, its propulsion centre of excellence, the composites role is with ADVANCED CONCEPTS, and the two project management roles sit in the group’s PMO; the optomechanical and software test roles are listed under EDGE Group itself. None of the eight postings limits applications by nationality, and no security-clearance requirement is mentioned in any of them. No salary figure is stated on any of the eight postings, and no closing date is given.
EDGE is the UAE’s advanced technology group, launched in November 2019 and headquartered in Abu Dhabi, with more than 35 specialised companies working across defence and emerging technologies. The eight openings are a good snapshot of what the group actually builds: precision optics, flight control for unmanned systems, gas turbine propulsion, composite structures for autonomous systems, embedded and avionics software testing, and the project management and supply chain that keep it all moving. Applications are made through EDGE’s careers page, linked below.
Job Overview
- Job title: 8 roles
- Company: EDGE Group
- Location: Abu Dhabi, UAE
- Employment type: Not stated in the postings
- Salary: Not disclosed
- Experience: 2–5 years for the procurement role, 4–7 years for the mechanical design role, 5+ years for the optomechanical and project management roles, 6+ years for the specialist role, 7+ years for the project management manager and software test roles, 8+ years for the composites role, 10+ years for the principal engineer role
- Application closing date: Not stated in the postings
- Source: careers.edgegroup.ae (official website)
Available Job Vacancies
EDGE Group is hiring for the following roles in the UAE:
- Abu Dhabi (8): Optomechanical Engineer; Principal Engineer – Guidance & Control (ADASI); Procurement Requisitioner (POWERTECH); Manager Project Management (PMO); Mechanical Design Engineer II (POWERTECH); Senior Design Engineer (Composites) (ADVANCED CONCEPTS); Specialist Project Management (PMO); Senior Software Test Engineer
About EDGE Group
EDGE was set up in November 2019 to build advanced technology in the UAE, and it has grown fast since — more than 35 specialised companies now sit under the group, covering autonomous systems, propulsion, precision engineering and more. The group is based in Abu Dhabi and describes its workforce as a genuinely multicultural one, drawn from around the world. On pay and benefits, EDGE says salaries are competitive and tax-free, and that depending on the role and seniority the package can include family visas, annual flight tickets, medical insurance for employees and their dependents, and education allowances for children. It also runs a learning academy and digital learning platforms for staff who want to keep building their skills.
Optomechanical Engineer — Abu Dhabi
The optics role. EDGE is looking for an experienced opto-mechanical design engineer to design and develop high-performance opto-mechanical components and systems — the precision hardware that sits inside advanced optical equipment. The work runs from first concept through analysis and prototyping to design validation, using 3D CAD and simulation tools throughout.
What this job involves
- Creating opto-mechanical concepts in 3D CAD, then designing, developing, analysing, documenting and supporting the testing of precision components and assemblies.
- Running tolerance, thermal, structural and optical analysis, using CAD, optical modelling and FEA software to check how a design will actually behave.
- Working out how loads and environmental conditions affect performance — particularly for optomechanical lens assemblies — and feeding that back into the design.
- Taking part in design reviews, troubleshooting problems and finding root causes with engineering and physics first principles, and supporting the production team with existing products.
- Developing processes so that what was designed can actually be manufactured, and producing the data packs and documentation for the optical components and systems designed.
What you will need
- A bachelor’s or master’s degree in Mechanical Engineering, Optical Engineering or a related field.
- At least 5 years of experience in opto-mechanical systems design and development.
- Strong skills in CAD tools and simulation platforms, including mechanical and thermal analysis of complex systems.
- Experience with optical components fitted into mechanical assemblies, and with structural, mechanical, thermal and vibration design and testing.
- Familiarity with electro-optics lab test equipment such as autocollimators and shakers; knowledge of the Zemax optical modelling tool is an advantage.
Principal Engineer – Guidance & Control — Abu Dhabi (ADASI)
The senior role in this roundup, and the one with the longest experience ask. The principal engineer leads the design, development and verification of guidance algorithms, flight-control laws and autopilot functions for aerospace and defence platforms, working with ADASI — EDGE’s end-to-end autonomous systems company, which builds unmanned systems for demanding defence work across the MENA region. This is a lead post, not a hands-off one: the role includes running technical work packages, chairing engineering reviews and mentoring other engineers.
What this job involves
- Leading the design and development of guidance algorithms, control laws, autopilot functions and control-allocation systems.
- Flight-dynamics modelling, stability analysis, sensitivity assessment and nonlinear simulation, with control solutions developed and validated in MATLAB/Simulink and similar tools.
- Verification and validation through simulation, SIL/PIL/HIL testing, ground testing and flight testing — and investigating when the test results do not match the simulation.
- Keeping requirements traceable, documentation in order and the work compliant with the safety and airworthiness requirements that apply.
- Leading technical work packages, running engineering reviews and mentoring engineers on the team.
What you will need
- A bachelor’s degree in Aerospace, Aeronautical, Electrical, Mechanical or Control Engineering, Robotics, Applied Mathematics or a related discipline; a master’s or PhD in guidance, control systems or aerospace engineering is preferred.
- Typically 10+ years of relevant experience in aerospace or safety-critical control-system engineering.
- Hands-on experience in control-law design, guidance systems, autopilot functions or control allocation, with a solid grasp of flight dynamics, control theory, stability and nonlinear simulation.
- Practical experience with MATLAB/Simulink or equivalent tools, and with control-system verification, simulation and testing.
- Experience with aircraft, UAVs, missiles, spacecraft or other fast-moving aerospace platforms is an advantage, as is knowledge of Python, C/C++, Stateflow and embedded real-time systems.
Procurement Requisitioner — Abu Dhabi (POWERTECH)
The procurement role, and the most accessible of the eight: 2–5 years of experience rather than a decade. The requisitioner works with POWERTECH, EDGE’s centre of excellence for propulsion — combustion engines, expendable turbojet engines and turbofan engines for UAVs and other advanced platforms. The job is to start, track and coordinate material and service requisitions so the workshop and project teams get what they need on time, while keeping everything inside procurement policy and budget controls.
What this job involves
- Raising purchase requisitions for materials, equipment and services in line with project and operational needs.
- Checking requirements and specifications with end users, engineering, finance, maintenance and warehouse teams before a requisition goes in.
- Making sure every requisition follows company policy, approval matrices and budget controls, and keeping accurate records of requisitions, approvals and supporting documents.
- Following up with the Procurement and Supply Chain teams on requisition status, lead times and delivery schedules, and sorting out discrepancies in quantities, specifications or delivery dates.
- Supporting demand planning by consolidating and forecasting material requirements, and producing reports on requisition status, turnaround time and outstanding requests.
What you will need
- A bachelor’s degree or diploma in Supply Chain, Business Administration, Engineering or a related field.
- 2–5 years of experience in a requisitioning, procurement or supply chain role.
- Experience working with SAP, Oracle or an equivalent ERP system, and a strong understanding of procurement and supply chain processes.
- Good organisation, attention to detail and follow-up skills, plus proficiency in MS Excel.
Manager Project Management — Abu Dhabi (PMO)
The senior project management role in this roundup. The PMO project manager delivers strategic initiatives for EDGE’s Directed Energy portfolio, embedding standard governance, processes and methods across the work — planning, running and delivering corporate projects inside their scope, budget and time limits.
What this job involves
- Keeping project controls in place and tracking key metrics, including baseline against actual schedule and quality.
- Making sure vendor agreements, service-level agreements and statements of work line up with project goals, risk limits and budgets, and monitoring vendor delivery against contractual deadlines, milestones and quality thresholds.
- Controlling contract scope creep, so any change to a project goes through formal approval before costs move.
- Preparing weekly or monthly progress reports for steering committees and senior leadership, and managing project budgets — forecasting actual costs against planned baselines and costing the monetary risks.
- Running the full project lifecycle, from the project charter through to closing and documenting lessons learned, including scheduling, planning and final acceptance of documentation before factory and site acceptance testing.
- Working with end users and internal stakeholders on technical requirements and specifications, meeting suppliers regularly and keeping track of installation status.
- Making sure project reporting data complies with corporate and state security regulations.
What you will need
- A bachelor’s or master’s degree in Engineering or another technical field.
- A minimum of 7 years in the defence industry, with experience working in agile or hybrid development cycles.
- Typically 5+ years of hands-on project management experience, ideally inside a structured corporate PMO.
- Project management certification (such as PMP) or systems engineering certification (such as INCOSE CSEP) is preferable.
- Strong knowledge of system installation, and a deep understanding of defence systems design, development and integration.
- Strong supplier-relationship, analytical, communication and stakeholder-management skills.
Mechanical Design Engineer II — Abu Dhabi (POWERTECH)
The turbomachinery role. The Mechanical Design Engineer II supports the design, analysis and development of gas turbine and turbojet/turbofan engines at POWERTECH, EDGE’s propulsion centre of excellence — working on combustion engines, expendable turbojet engines and turbofan engines for aerospace, defence and autonomous applications, including UAV platforms. The role takes ownership of defined components or subassemblies, working under the guidance of senior engineers.
What this job involves
- Designing and developing turbomachinery components — shafts, spacers and structural parts, casings, brackets and housings, seals and secondary hardware — and creating 3D CAD models and 2D engineering drawings.
- Applying GD&T and tolerance stack-up principles, and supporting stress, deformation and fatigue analysis of engine components.
- Assisting with rotor assembly design and stack-up definition, and supporting bearing integration and housing design.
- Applying design-for-manufacturability principles, defining basic material selections and tolerances, and working with the manufacturing team.
- Supporting engine build and rig testing activities, and helping define instrumentation.
- Preparing engineering drawings and documentation, supporting design changes and configuration updates, and contributing to root cause analysis and design improvements.
What you will need
- A bachelor’s degree in Mechanical or Aerospace Engineering.
- 4–7 years of experience in mechanical design, with turbomachinery experience preferred.
- Experience working in product development environments.
- A good understanding of mechanical design fundamentals, stress and fatigue behaviour, and basic rotating machinery concepts.
- Proficiency in CAD tools (CATIA, NX or similar) and basic FEA tools (ANSYS or similar).
- Experience in gas turbines or turbojet engines is preferred, as is exposure to bearings and lubrication systems, sealing and clearance control, and testing or prototype builds.
Senior Design Engineer (Composites) — Abu Dhabi (ADVANCED CONCEPTS)
The composites role, and one of the most senior posts in this roundup. The Senior Design Engineer works with ADVANCED CONCEPTS, the EDGE entity building advanced autonomous systems — including medium-endurance, high-altitude fixed-wing unmanned aerial systems, precision loitering munitions, cruise missiles and guided artillery munitions. The job is to lead design-for-manufacture practice for composite parts and assemblies, from concept through to production.
What this job involves
- Leading design-for-manufacture practices and critiquing new designs to find the most suitable manufacturing processes.
- Reviewing comparison studies of different manufacturing methods and materials, and presenting clear conclusions to project leadership.
- Creating and implementing engineering changes and work instructions on the shop floor, and monitoring compliance at every stage of production.
- Driving the technical selection of materials and manufacturing processes, and designing alternative processes to solve problems and improve quality, efficiency, mechanical performance and cost competitiveness.
- Following production output project by project, running root cause analysis where problems appear, and finding permanent solutions.
- Taking part in technical design reviews, evaluating concepts for manufacturability, and feeding technical input into designs released for production.
- Monitoring project lifecycles and material usage to measure production efficiency, and building plans to cut excess material use and lift productivity.
- Examining finished products against quality standards and tolerance and mechanical performance specifications.
- Using strong 3D design experience to redesign parts or create clean-slate designs of complete assemblies, from concept to production drawings including full bills of materials.
- Assisting with the integration and testing of composite assemblies and systems with electrical or hydraulic components.
What you will need
- A bachelor’s or master’s degree in Engineering, specialising in mechanical, composites or material science, or a related field.
- A minimum of 8 years in a production engineering position specialising in composites, or an equivalent role; 10+ years is preferred.
- Experience in composites manufacturing for aerospace, defence or precision engineering products.
- A deep understanding of composite materials, chemistry and resins across different manufacturing processes.
- Strong CAD experience, and experience using SAP or other ERP software.
- Certification in Six Sigma, lean manufacturing or technical process proficiency is preferable; a DFMA qualification and UAE or Middle East experience are desirable.
- Excellent communication and leadership skills.
Specialist Project Management — Abu Dhabi (PMO)
The hybrid role in this roundup — part project governance, part hands-on technical execution. The Specialist in the PMO works as a partner to project managers and executive leadership, using an engineering background to drive delivery, clear technical bottlenecks and keep PMO standards in place, while leading matrixed engineering teams and managing vendor contracts without formal line-management authority.
What this job involves
- Carrying out technical and administrative tasks assigned by project leadership, including feasibility analyses, technical documentation, change order reviews and risk registers.
- Reviewing engineering designs, feasibility studies and technical specifications to check they line up with organisational goals and international compliance standards.
- Allocating engineering talent, equipment and capital across competing projects to clear bottlenecks.
- Working with project managers to define project scope, technical requirements and milestone criteria, so PMO governance and ground-level engineering execution stay aligned.
- Acting as the technical coordinator between project managers, engineering disciplines and external contractors, and monitoring action items with PMO tools so task status, resource constraints and blockers stay visible.
- Working with end users and internal stakeholders on technical requirements and specifications, meeting suppliers regularly and keeping track of installation status.
- Making sure project reporting data complies with corporate and state security regulations.
What you will need
- A bachelor’s degree in Aerospace, Electrical, Mechanical, Systems or Software Engineering.
- 6+ years of experience in the defence industry, including 5+ years in a PMO.
- Strong knowledge of system installation in aircraft.
- Strong supplier-relationship, analytical, communication and stakeholder-management skills.
Senior Software Test Engineer — Abu Dhabi
The software testing role, and the newest posting in this roundup — live on 16 November 2026. EDGE is looking for an experienced Senior Software Test Engineer with a strong background in embedded systems and aviation software testing. The role covers the full testing lifecycle for embedded and avionics-related systems in safety-critical environments, with compliance to the RTCA DO-178C standard at its core.
What this job involves
- Designing and maintaining test cases from requirements and design documents.
- Executing manual and automated tests against functional, performance and safety requirements.
- Ensuring compliance with RTCA DO-178C in safety-critical environments.
- Managing the full testing lifecycle: planning, execution, defect reporting and completion.
- Overseeing testing for embedded and avionics-related systems.
- Mentoring the team on test automation and CI best practices, and driving continuous improvement in QA strategies and methodologies.
- Collaborating with cross-functional teams on system integration and validation.
What you will need
- A bachelor’s degree in Computer Science, Software Engineering, Electrical Engineering or a related field.
- A minimum of 7 years of experience in software testing for embedded systems in the aerospace or defence industry.
- Strong experience with RTCA DO-178C standards and regulatory compliance.
- Proven ability to develop and execute test cases, test plans and test procedures.
- Proficiency with test automation tools; experience with the Rapita Verification Suite is preferred.
- Strong working knowledge of JIRA and the Atlassian suite for defect tracking and team collaboration.
- Technical and line management experience, familiarity with automated testing frameworks, Agile and TDD, and strong analytical and communication skills are preferred.
Requirements at a glance
| Role | Experience asked for | Qualification | Key tools and skills |
|---|---|---|---|
| Optomechanical Engineer | 5+ years in opto-mechanical design | Bachelor’s or master’s in Mechanical or Optical Engineering | 3D CAD (e.g. SolidWorks), ANSYS, FEA, Zemax an advantage |
| Principal Engineer – Guidance & Control | Typically 10+ years in aerospace or safety-critical control systems | Bachelor’s in Aerospace, Control, Electrical, Mechanical or related; master’s/PhD preferred | MATLAB/Simulink, flight dynamics, SIL/PIL/HIL, flight testing |
| Procurement Requisitioner | 2–5 years in requisitioning or procurement | Bachelor’s or diploma in Supply Chain, Business or Engineering | SAP or Oracle ERP, MS Excel, demand planning |
| Manager Project Management | 7+ years in defence; typically 5+ years in project management | Bachelor’s or master’s in Engineering or a technical field | PMO governance, vendor contracts, budgets, FAT/SAT |
| Mechanical Design Engineer II | 4–7 years in mechanical design (turbomachinery preferred) | Bachelor’s in Mechanical or Aerospace Engineering | 3D CAD (CATIA, NX), ANSYS/FEA, GD&T, DFM |
| Senior Design Engineer (Composites) | 8+ years in composites production engineering (10+ preferred) | Bachelor’s or master’s in Mechanical, Composites or Material Science Engineering | CAD, DFMA, Six Sigma/lean, SAP/ERP |
| Specialist Project Management | 6+ years in defence; 5+ years in a PMO | Bachelor’s in Aerospace, Electrical, Mechanical, Systems or Software Engineering | PMO tools, vendor contracts, system installation |
| Senior Software Test Engineer | 7+ years in software testing for embedded systems (aerospace or defence) | Bachelor’s in Computer Science, Software Engineering, Electrical Engineering or a related field | RTCA DO-178C, test automation tools, Rapita Verification Suite (preferred), JIRA/Atlassian |
Before you apply
- Match the tools, not just the title. Each posting names its tools plainly — CAD and ANSYS for the optics and mechanical design roles, MATLAB/Simulink for guidance and control, SAP for procurement and composites, and RTCA DO-178C and test automation tools for software testing. Put the ones you actually use near the top of your CV.
- The principal role is a lead post. If you go for it, show the leadership side as well as the technical side: work packages you ran, reviews you chaired, engineers you mentored.
- EDGE says to apply even if you don’t tick every box. The postings say the group is interested in what a candidate can bring, and encourage applications from people who don’t meet every single requirement.
- Check the live posting before you apply. The first three roles were live on 14 November 2026, the four new roles were live on 15 November 2026 and the software test role was live on 16 November 2026, but defence hiring moves fast and a role can close without a published deadline. Confirm the details on the careers page itself.
- Never pay to apply. EDGE recruits through its own careers page. Anyone asking for a fee for a job, a visa or a medical in EDGE’s name is not representing the company.
How to Apply
Applications for these roles are made through the employer’s careers page. You can view the roles and apply here:
Apply on the EDGE careers page
You can apply directly on the portal or start an application with LinkedIn. Make sure your CV is up to date and shows the experience and tools each role asks for — and for the engineering roles, include the specific systems and platforms you have worked on.
Note: These roles are listed on the employer’s careers page. Please check the listing for the latest status before applying, as a role may have been filled or the details may have changed.
EDGE Group at a glance
EDGE is the UAE’s advanced technology group for defence and beyond, launched in Abu Dhabi in November 2019. It brings together more than 35 specialised companies and centres of excellence working across autonomous systems, propulsion, precision munitions and other advanced defence technologies.
- Launched: November 2019
- Headquarters: Abu Dhabi, UAE
- Companies: more than 35 specialised companies
- Focus: defence and emerging technologies
- Centres of excellence: multiple, across the group
Related reading
- Average Salaries in the UAE by Profession (AED)
- Working in Dubai: What Job Seekers Need to Know
- UAE Job Scams: How to Spot Fake Job Offers
Frequently Asked Questions
How do I apply for EDGE Group jobs in the UAE?
Applications are made through the employer’s careers page, linked in the How to Apply section above. Select the role you want on the careers page and apply there — you can apply directly on the portal or start with LinkedIn.
What is the salary for these EDGE roles?
No salary figure is stated on any of the 8 postings. EDGE says its salaries are competitive and tax-free, with benefits that can include family visas, annual flight tickets, medical insurance and education allowances depending on the role and seniority. The exact figure is discussed during the hiring process.
When do these EDGE roles close?
No closing date is stated on any of the 8 postings. The first three roles were live on 14 November 2026, the four new roles were live on 15 November 2026 and the software test role was live on 16 November 2026, so apply while they are live rather than waiting for a deadline that may not be published.
Are the EDGE roles open to all nationalities?
Yes. None of the eight postings limits applications by nationality, and no security-clearance requirement is mentioned in any of the eight listings. EDGE’s equal-opportunity statement says employment decisions are not made on the basis of nationality.
Where are the EDGE roles located?
All eight roles are based in Abu Dhabi, where EDGE is headquartered.
Which EDGE companies are these roles with?
The Principal Engineer – Guidance & Control role is with ADASI, EDGE’s autonomous systems company, and the Procurement Requisitioner and Mechanical Design Engineer II roles support POWERTECH, its propulsion centre of excellence. The Senior Design Engineer (Composites) role is with ADVANCED CONCEPTS, and the Manager Project Management and Specialist Project Management roles sit in the group’s PMO. The Optomechanical Engineer and Senior Software Test Engineer roles are listed under EDGE Group itself.
You apply on the employer’s own careers page, not on this site.
How We Publish Jobs
Every listing here starts from the employer’s own announcement — we do not invent roles, salaries or closing dates. We check each posting before it goes live and show the employer’s original date where we know it. Listings can close or change, so always confirm the latest status on the original posting before you apply. Spotted something wrong or expired? Tell us here and we will check it.


Leave a Reply
You must be logged in to post a comment.